Autoload system at an angle, two levels - AL L2

ALL2 1

Automatic loading - Autoload- on two levels with AL L2

ALL2 4

Autoload loader for transverse loading on 2 levels at an angle, AL L2.


Autoload AL L2, open

ALL2 1
ALL2 4
Standard specification

Welded machine frame, stainless steel, overall width transport system 840 mm
Panels, doors and electrical cabinet or switchbox made from stainless steel
Hasp locking for cover panels
Protection hoods made of polycarbonate
Footrests without dowel holes
Drive and synchronisation of the transport system with own drive - in combination with an encoder integrated in the bagging machine
Plastic modular belt for line divider
Stainless steel lateral guides above line divider, manually adjustable
Plastic modular belt , 2-lanes
Plastic modular belt, feeding bottom layer
Plastic modular belt, feeding upper layer
Stainless steel lateral guides above transport line, manually adjustable
Servo-driven lengthwise rake device, 2-lanes, installed above the transport system
Switch cabinet with hasp locking
Operating elements located in the machine panel or door of the switch box
Control unit integrated in the bagging machine
Servocontroller Omron/ Yaskawa
Electric execution according to CE-specification
Operating language and labels in German language
Operating manual in German language
Spare parts catalogue in German language

Welded machine frame, lacquered in stainless steel design colour, overall width transport system 1100 mm
Additional signal lamp
Switch cabinet with air-conditioning
Voltage modulation, 3-phase
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manually
ALL2 Hartmann

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

Are brochures in other languages available?

Further brochures in other languages ​​are available here. The technical state may not be updated!

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

Hot Dogs


Device for automatic feeding and stacking of grouped products such as baguettes, hot dog or hamburger buns into a packaging machine. The products are fed into the machine in two groups.

Depending on the configuration, the packaging scheme and the subsequent packaging machine, the products are conveyed by the autoload system with a pusher into the packaging machine's cross-positioned feed conveyor. Product groups can be stacked on top of each other in conjunction with a height-adjustable feed conveyor.

Technical specifications

Dimensions: Length: approx. 2200 mm, Width: approx. 1800 mm, Height approx. 1650mm
Product dimensions: Diameterr: min. 4 inch (92 mm), max. 5 inch (130 mm), Height min. 20 mm, max. ca. 35 mm
Capacity: approx. 40-65 product layers/min per infeed position, depending on products
Speed: adjustable, depending on the packaging machine
Controller: Omron
Operating panel: Touch panel /Touch panel of the packaging machine
Control voltage: 24 V, DC
Frequency controller: Hitachi
Pneumatic system: Festo
Power supply: 230/400 Volts / 50 cycles
Compressed air: min. 6,0 bar (ISO 8573-1)
Operating side: left / right
Protection class: IP 54