HB 1

Horizontal band slicer - HB 1

HB 1 und HB 2

HB 1 belt slicing machine

HB 1 offen

Easily accessible for cleaning and maintenance.


Optional: Double cutting device


Precise blade guidance for optimum slicing results.

HB 1 und HB 2 Beölung

Optional: lubrication device

HB 1 und HB 2 Krumentrichter

Crumbs funnel

HB 1 und HB 2
HB 1 offen
HB 1 und HB 2 Beölung
HB 1 und HB 2 Krumentrichter
Standard specification

Welded machine frame, stainless steel, overall width transport system 840 mm
Panels, doors and electrical cabinet or switchbox made from stainless steel
Hasp locking for cover panels
Protection hoods made of polycarbonate
Slides and/or funnels for bread crumbs
Footrests without dowel holes
Conveyor system with adjustable speed
Plastic modular belt with anti-skip rubber surfaces at the bottom side
Plastic modular belt for top pressure with separate drive
Lateral guides above transport conveyor, manually adjustable 6-lanes
Horizontal cutting station to halve the product
Drive for slicer(s) with frequency-converter adjustable speed
Manual height adjustment of cutting position and product height
Set of band blade HB 1 1x
Spare set of band blade HB 1 1x
Collecting dip tray, on carriage
Equipment stops in case of blade break
Slicing compartment with additional sensors with mechanical safety locking for openings
Switch cabinet with hasp locking
Switch cabinet with fan+filter system - standard-
Contactor control system with switches
Control unit integrated in the bagging machine
Automatic Stand-By control system for behind located machines in case of missing products
Frequency converter Hitachi (Omron)
Electric execution according to CE-specification
Operating language and labels in German language
Operating manual in German language
Spare parts catalogue in German language

Modular belt made of plastic with rubber lining at the bottom, 3-lane for knife guidance for thin products
Oiling system for single horizontal band saw
Scratching device for band blades
Collecting dip tray, manually removable
Signal lamp - red / green
Signal horn
Switch cabinet with air-conditioning
Frequency converter SEW, transport
Frequency converter Allen Bradley
Voltage modulation, 3-phase
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manually
HB1 Hartmann

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

Are brochures in other languages available?

Further brochures in other languages ​​are available here. The technical state may not be updated!

Is it possible to combine a GHD Hartmann Schneider with other packaging machines?

Of course, our bread slicers can not only be combined with capping and packaging machines from GHD Hartmann, but also with machines from other manufacturers.

Take advantage of our many years of experience for optimum coordination and connection.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

Hamburger Brötchen
Vollkorn Hamburger Brötchen

HB 1

Automatic slicing machine for baguettes, hot dog and hamburger buns. The incoming products are transferred to an upper and lower belt and sliced using a separately driven belt blade.

All guides, the slicing position, and the upper belt can be adjusted without tools. The products can be fed as sorted or unsorted.

The machine frame and all casings are made of stainless steel – important for long value preservation and good for easy and hygienic cleaning.

Technical specifications

Dimensions: Length: approx. 2000 mm, Width: customer specific, working height approx. 1050 mm
Product dimensions: Diameter / width: min. approx. 50 mm, Height: 20 - 80 mm
Capacity: product specific
Speed: adjustable
Speed of the slicer: adjustable
Band slicer length: customer specific
Controller: Omron
Operating panel: Switches and buttons (line control- touchscreen)
Frequency controller: Hitachi
Pneumatic system: Festo
Power supply: 230/400 Volts / 50 cycles
Power consuption: approx. 5 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Operating side: left / right
Protection class: IP 54
Adjustment: manual /automatic