VS 320 SV 12 T

Packaging machine - VS 320 SV 12 T

    Pictures
    VS 320 SV 12 T

    VS 320 SV 12 T, automatic packaging machine

    ABM

    Automatic "ABM" bag magazine - bag replenishment can be carried out while the machine is running.

    Absaugung

    Device for suction extraction of the film sections

    Siegelbalken

    Sealing with sealing bars: the pulse-controlled sealing station ensures exact sealing results.

    Infeed

    Infeed: flexibly adjustable light barriers for fast product adjustment.

    Kühlung

    Solid pump system for cooling the sealing bar.

    Spreizbleche

    Always at hand: the spreader plates are stored on the inside of the door.

    VS 320 SV 12 T
    ABM
    Absaugung
    Siegelbalken
    Infeed
    Kühlung
    Spreizbleche
    VS320SV12T
    Standard specification
    
    Welded machine frame, lacquered in stainless steel design colour, standard
    Panels, doors and electrical cabinet or switchbox made from stainless steel
    Hasp locking for cover panels
    Protection hoods made of polycarbonate
    Footrests without dowel holes
    Conveyor system with servo driven speed
    Longitudinal feed: Type `Tortilla-Infeed` with stoppers, lifts and cover
    Transfer line with pusher dogs, base plate made from plain non-stick coated stainless steel
    Lateral guides, plain stainless steel
    Lateral guides above transfer line, manually adjustable by handwheel
    Substitiution of bag air aspiration device
    Top pressure cussion and bag spreading instead of bag aspiration
    Integrated side channel blower device
    Upper product holder - twin
    Bottom product holder
    Twin bag lifting device
    1st set of spreading plates for bag opening
    2nd set of spreading plates for bag opening
    Wide spreading plate carriage for special applications
    Non-stick coating for machine components which get in touch with the product
    Automatic bag magazine for extra-fast stack changeover `ABM-70 Twin S ` for straight U-shaped brackets and cropped U-shaped brackets
    Automatic infeed and positioning of the next batch of bags
    Automatic controlled switch-off at empty bag magazine
    Protection hood for bag magazine - Stainless steel triangle hood and curtain
    Sealing aggregate, pulsed heating of sealing wires - PE-foils
    Cutting off the foil overhang after sealing
    Suction device for cut off foil residues
    Special in line discharge conveyor, 2 lanes for flat, round bread
    Sterile filter for sterilization the compressed air coming into contact with the products
    Signal lamp - red light / green light
    Signal horn
    Switch cabinet with hasp locking
    Switch cabinet with air-conditioning
    Comfort-operating panel, rotatable with support arm system
    Controls + touchpanel Allen Bradley
    Servocontroller Omron
    Automatic Stand-By in case of missing products
    Remote service, VPN-Switch INSYS, (Master unit)
    Voltage modulation, 3x 1 phase, input 480V
    Isolating transformer
    Electric execution according to UL-specification
    Operating language and labels in English language
    Operating manual in English language
    Spare parts catalogue in English language
    Options
    
    Welded machine frame, stainless steel, standard (crank-rockers made of galvanized steel)
    Protection hoods made of perforated stainless steel panels
    Illumination of the working area inside the machine
    Sealing aggregate, permanent heated sealing plates, non-stick coated - PP-foils
    Product control on discharge conveyor and press jaw, adjustable by hand wheel
    In line discharge: Accelerator belt, length 750 mm, foldaway, fixed at machine door
    Switch cabinet with service interface FrontCom® with LAN and power socket
    Additional signal lamp
    RFID - Panel access authorization per chip, 10 pieces with up to 5 authorization levels
    RFID - Additional chip, 10 pcs. with up to 5 authorization levels
    Customer-specific special machine modifications
    Customer-specific operating language and labels
    Customer-specific operation manually
    Remote video URL
    Remote video URL

    Can the machine be cleaned wet?

    The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

    Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

    Change kits allow cleaning and preparation in addition to the production operation.

    What is the difference between packaging and sealing?

    Packaging means: positioning products automatically in a bag, extracting residual air from the bag, closing the bag close to the product inside the packaging machine.

    Closing means: The products are either introduced externally into the bag or manually inserted into the bag on the device.
    Some devices suck the residual air out of the bag, after which the bag automatically closes inside the device.

    What is the difference between a type GBK and type VS ?

    In the case of the GBK type, standing bread slices are packed, while the VS type packs lying stapled slices. Both systems are able to package other types of products and products grouped differently.

    GBK type

    - Upright standing bread slices
    - Whole breads
    - Grouped products - fast food

    VS type

    - lying stapled bread slices
    - Stacked flat breads (tortilla, arabic bread, pitta)
    - Grouped products

    Are brochures in other languages available?

    Further brochures in other languages ​​are available here. The technical state may not be updated!

    How can I determine the size of bags?

    Bag sizes depend on the products and the orientation of the products in the bag.

    In any case, the product tolerances must be considered. This is especially important when several products are packed side by side, one after the other or one above the other in a single package. A beautiful packaging fits as closely as possible to the product and supports the product. The sizes recommended by GHD Hartmann can be looked up in an Excel spreadsheet.

    How loud is a machine by GHD Hartmann?

    The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

    Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

    The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

    As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

    Which controls can GHD Hartmann Maschinenbau offer?

    In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

    Siemens or Allen Bradley are available as options.

    What compressed air quality is recommended for machine use in the food industry?

    According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

    Which bag closures can GHD Hartmann offer?

    Hartmann closing devices and Hartmann packaging machines have an integrated aggregate for the closure application. Depending on the machine type and series, the closing system can be supplied for the application of a certain type of bag closure. Later conversions are partly possible.

    Clip closure: The closure used very often in Europe. Cost effective with the possibility of printing on the closure. Good to use for PE bags, PP bags and paper bags.

    Clip Closure Hartmann Bag packaging

     

    Kwik-Lok ®; Schutte Clipps ® G or corresponding closures: Widespread in North America and Asia. No metal components in the closure, but difficult to detect or undetectable. Unsuitable for paper bags. A printing of the closure is possible.

    Kwik-Lok Schutte Clipps G

     

    Tape - Closure: In the United Kingdom, in English-speaking countries and occasionally in Africa, the tape closure is applied. Hartmann offers this type of closure in packaging machines and specially designed sealing devices. A printing of the tape closure is possible.

    Tape closure Hartmann

     

    Sealing: The sealing of bags with a sealing system is available for various types of machines. For closing, the filled bags can be sealed, or the frill can be sealed in addition to the conventional closure. The packaging material and its welding properties must be observed.

    In the case of pillow packs, the packaging film is sealed on the longitudinal and transverse side and, optionally, as a division in the longitudinal direction. Depending on the machine type, the protruding film is cut off during sealing.

    bag_sealing rouche_frill_sealing Hartmann

     

    Tamper proof / Quality closure: In addition to the clip closure or Kwik-Lok ® / Schutte Clipps ® G closure, a tamper proof application system can optionally be installed within the GHD Hartmann machine. This lock is either one or two rows and can be activated. It increases security against manipulation from outside during sales.

    tamper proof qualitysealing Hartmann

     

    Warp Close: With the Wrap Close, paper but also plastic bags can be closed. The bag is automatically wrapped on the opening side and secured and closed with a label.

    WarpClose

     

    Twist - Closure: This closure is known in South America and in English-speaking countries. GHD Hartmann cannot offer integration within the packaging machines. This closure is attached with a separate device provided by the customer after the products have been packed in the bag. For technical reasons, it is not possible to remove air from the bags when they are closed.

    Twister Drahtverschluß

     

    Which bag closures can be used with packaging machines or sealing devices from GHD Hartmann?

    Hartmann machines process a large number of different closures. The capping system can be supplied by machine type and series for a specific type of bag closure.

    Tortilla
    Pita

    VS 320 SV 12 T

    Fully automatic bag packaging machine for tortilla stacks. The machine's product-specific design meets the varied international packaging requirements. Tortilla stacks are packed into foil bags and sealed tightly inside the machine in a single operation.

    The drive concept of the VS 320 SV 12 T machine guarantees a constant switching point accuracy for all functions and reduces maintenance to a minimum. By consistently separating the product work area from the drive, this machine design also meets all cleanroom requirements. Drive technology in a wide range via servo drives.

    Technical specifications
    
    Dimensions: Length: approx. 4220 mm, Width: approx. 2290 mm, Heigth: approx. 1730 mm, Working height: approx. 955 mm, Foil collection container height: approx. 2550 mm
    Weight: 1500 kg
    Product dimensions: Length: max. 305 mm, Width: max. 305 mm, Diameter: max. 305 mm, Height: max. 60 mm
    Capacity: up to 3600 Packages/h
    Speed: adjustable
    Controller: Allen Bradley
    Operating panel: Touchscreen
    Control voltage: 24 V, DC
    Frequency controller: Allen Bradley
    Servo-controler: Allen Bradley
    Pneumatic system: Festo
    Power supply: 480 Volts / 60 cycles
    Power consuption: 4 kW
    Compressed air: min. 6,0 bar (ISO 8573-1)
    Packing material: Pre-manufactured plastic bags (PE, else on demand)
    Operating side: left / right
    Protection class: IP 54
    Adjustment: manual
    Special: Only for sealing closure