KM 600 P

KM 600 P, circular blade slicing machine

Images
Kreismesser KM 600 P

Kreismessermaschine KM 600 P

KM 600 P Detail Dichtemessung

Optimal recording: density and weight, start and end waste, number of portioned packaging units.

KM 600 P Fremdkörpererkennung

All upstream and downstream device data is included in the control process. In addition to the specific weight distribution in the bread loaf, the scanner also reliably detects potential foreign objects to protect the machine.

KM 600 P Herstellprozess

Transparent manufacturing process: the recorded values enable determination and analysis of the smallest deviations in the manufacturing process.

KM 600 P Detail Beölung

Hygienic and economical: precise lubrication of the rotating blade minimises cleaning effort and lubricant quantity. Precise slicing: the blade's slicing speed can be adjusted independently of the rotation speed.

Reinraum

Clean room configuration in various expansion stages, customised.

Standard specification

Welded machine frame, stainless steel, standard
Panels, doors and electrical cabinet or switchbox made from stainless steel
Cover panels with hasp locking
Separated compartments for the drive unit and the slicing system - Direct access to the slicing compartment for cleaning or disc-blade exchange
Slides and/or funnels for bread crumbs
Footrests without dowel holes
Infeed conveyor system with servo driven speed
Servo-driven disc slicer
Main gearbox equipped with a differencial drive to seperate control the circumferential speed of the disc slicer
Transport belt at the infeed together with TRKM2 or TRKM 3 (for loaf length up to 3 m)
Sprocket chain conveyor for product infeed, removeable upper transport and bottom transport - with attachment bracket system for external cleaning
Top belt height, driven adjustable
Disc blades for KM 600
Full-automatic, precise adjustable clocked spay-oil application
Oil application system with reservoir in the machine
Slicing compartment with additional sensors with mechanical safety locking for openings
Local supplied suction system: Crumb suction above and beside the infeed, collecting funnel below the slicer for crumbs and endpieces. Pipeworks up to the central connection point for connection to local suction system. Installation by customer
Local supplied suction device for oil mist from above the slicer housing for connection to local suction system. Installation by customer
Signal lamp - red / green
Signal horn
Switch cabinet located separate (max. 6 m)
Switch cabinet with hasp locking
Switch cabinet with air-conditioning
Cable tray, open design above the machines
Evaluation of data provided by the scanner system
Control unit integrated in the Portioning system
Servocontroller Yaskawa
Automatic Stand-By control system for behind located machines in case of missing products
Electric execution according to CE-specification
Operating language and labels in German language
Operating manual in German language
Documentation in German language
Options

Pusher system for endpieces (back end), driven fork unit
Central oil supply system, located separate from machines
Illumination of the working area inside the machine
Switch cabinet with service interface FrontCom® with LAN and power socket
Additional signal lamp
Remote service, VPN-Switch INSYS , (Master unit)
Voltage modulation, 3-phase
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual
KM-Linie

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

What should be considered when using a density scanner?

When using X-ray inspection systems, user-specific laws and regulations must be observed by the user. To operate the plant within the EU, the operator of the facility must be trained as a radiation protection officer. The radiation protection approval (TÜV approval) should take place during commissioning.

A radiation protection inspection can only be commissioned by the operator of the facility. A decrease can be accompanied by WIPOTEC-OCS GmbH or GHD Hartmann.

Graubrot Scheiben
Sonnenblumenkernbrot
Stangenbrot Kasten
Stangenbrot GHD 2

KM 600 P

The KM 600 circular blade machine is trend-setting in the field of slicing technology. All types of bread strips can be cut at the highest level in a continuous process. Consistent separation of the working and drive areas creates optimum hygienic conditions.

Stops for maintenance and cleaning are reduced to a minimum. The lubrication unit developed by Hartmann is an optimal performance device that is setting standards.

A space-saving and flexible system for manual loading, which can be expanded with additional components for further automation.

Technical specifications

Dimensions: Length: 5590 mm, Width: approx. 2000 mm, Höhe: 2270mm, Einlaufhöhe: 1050 mm
Weight: 1800 kg
Product dimensions: Length: approx. 1480/ 3000 mm, Width: 60 - 200 mm, Height: 80 - 180 mm
Capacity: adjustable up to 600 cuts/ min
Speed disc slicer adjustable
Dia. Cutting disc 680 -750 mm
Controller: Omron
Operating panel: Touchscreen within panel of the portioning system
24 V, DC
Frequency controller: Hitachi
Servo-controler: Yaskawa
Pneumatic system: Festo
Power supply: 230/400 Volts / 50 cycles
Power input: approx. 9 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Operating side: left
Protection class: IP 54
Adjustment: automatic