GS 60 XL

GS 60 XL, reciprocating slicer machine

Gatterschneider GS 60 XL

GS 60 XL reciprocating slicer machine

Gatterschneider GS 60 XL, geöffnet

GS 60 XL reciprocating slicer machine, open

Gute Zugänglichkeit zur Reinigung und zum Wechsel der Messerrahmen.

Good accessibility for cleaning and changing the blade frames.

Messerrahmen: Die Zuführ- als auch die Schnittgeschwindigkeit ist regelbar.

Blade frame: both the feeding and slicing speed are adjustable.

Outfeed GS 60 XL

Outfeed: speed is continuously adjustable and thus can be synchronised with the packaging machine.


Reciprocating slicer system with precise slice thicknesses.

Gatterschneider GS 60 XL
Gatterschneider GS 60 XL, geöffnet
Gute Zugänglichkeit zur Reinigung und zum Wechsel der Messerrahmen.
Messerrahmen: Die Zuführ- als auch die Schnittgeschwindigkeit ist regelbar.
Outfeed GS 60 XL
Standard specification

Welded machine frame, stainless steel, standard
Panels, doors and electrical cabinet or switchbox made from stainless steel
Cover panels with hasp locking
Protection hoods made of polycarbonate
Footrests without dowel holes
Slicer-blade drive 3 kW
Conveyor system with adjustable speed
Lateral guides in front of product infeed, manual adjustable
Product infeed with lateral guides, manual adjustable by handwheel
Top belt height, manual adjustable by handwheel
Slicer - Bottom infeed: Plastic modular belt with anti-skip rubber surfaces
Slicer -Infeed: Side guiding by driven belts
Slicer -Upper infeed by belt
Infeed driven movable better access for cleaning and blade set-up
Blade stroke 77 mm
Cutting frames with vertical guiding plates for one constant slice thickness
Spare blade set for reciprocate slicer 110 pcs.
Blade tensioning device with pre-adjusted force
Set of tools for blade exchange - Torque spanner and clamping lever
Equipment stops in case of blade break
Slicing with dry blades
Non-stick coating for machine components which get in touch with the product
Plate at the infeed side of the slicer Outfeed
Slicer-Outfeed equipped with chain conveyor with pusher bars, base plate made from structured stainless steel.
Product outfeed with lateral guides, manual adjustable by handwheel
Catching tray for crumbs below outfeed position, extendable drawer, stainless steel
Signal lamp - red / green
Signal horn
Switch cabinet with hasp locking
Switch cabinet with air-conditioning
Comfort-operating panel, rotatable with support arm system
Controls + touchpanel Omron
Frequency converter Hitachi
Electric execution according to CE-specification
Operating language and labels in German language
Operating manual in German language
Documentation in German language

Protection hoods made of perforated stainless steel panels
Slicer-blade drive 4 kW
Slicer-blade drive 5,5 kW
Accumulating belt in front of the Infeed, plastic roller carpet Azetal
Accumulating belt in front of the Infeed, stainless steel roller carpet
3 Sensors to detect twisted products - installed above the transport system
2-lane-product feeding with individual upper belts and bottom belts. Adjustable side guides. Including product sensoring
Blade stroke 20 mm
Blade stroke 50 mm
Blade stroke 100 mm
Additional cutting frames with vertical guiding plates for one constant slice thickness
Storage Trolley for up to 4 sets of additional cutting frames
Refuse of endpieces / heels. Adjustable plate in front of the slicer Outfeed
Outfeed with curved side guides to feed a flowpacking machine
Additional signal lamp
Frequency converter Allen Bradley
Remote service, VPN-Switch INSYS , (Master unit)
Voltage modulation, 3-phase
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual
GS60XL Layout

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

Are brochures in other languages available?

Further brochures in other languages ​​are available here. The technical state may not be updated!

Is it possible to combine a GHD Hartmann Schneider with other packaging machines?

Of course, our bread slicers can not only be combined with capping and packaging machines from GHD Hartmann, but also with machines from other manufacturers.

Take advantage of our many years of experience for optimum coordination and connection.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.


GS 60 XL

The GS 60 XL reciprocating slicer machine is a wide, high-performance slicing machine for bread, sugary products, fruit bread, raisin breads and cakes. It cuts the products into slices of exactly the same size due to the vertical blade arrangement. The GS 60 XL is designed for continuous operation. The basis for this high performance is a Hartmann gearbox, which is equipped with special lubrication. In order to ensure optimum synchronisation with the packaging machine, the discharge conveyor is equipped with its own frequency-controlled drive. Combining it with the Hartmann packaging machines results in a perfectly coordinated overall solution with high flexibility and production reliability.

Technical specifications

Dimensions: Length: 2700 mm, Width: 1250 mm, Height 1620mm
Weight: approx. 1200 kg
Product dimensions: Length: 160 - 550 mm, Height: 50 - 170 mm
Capacity: up to 3600 products/ h (single lane)
Speed: adjustable
Speed of the slicer: adjustable
Controller: Omron
Operating panel: Touchscreen
24 V, DC
Frequency controller: Hitachi
Pneumatic system: Festo
Power supply: 230/400 Volts / 50 cycles
Power input: approx. 5 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Operating side: left / right
Protection class: IP 54
Adjustment: manual /driven
Special: multi-lane throughfeet possible