Images
DS

DS multiple disc slicer

DS, offen

DS multiple disc slicer, open.

DS Verstellung

Central adjustment for blade positions in height and slicing depth.

DS

Good accessibility for maintenance and cleaning.

Reinigung

Good accessibility for blade changing or cleaning.

DS Produktführung

Safe product guidance with easy adjustment.

Produktführung

Safe product guidance

Standard specification

Welded machine frame, stainless steel, overall width transport system 990 mm
Panels, doors and electrical cabinet or switchbox made from stainless steel
Cover panels with hasp locking
Protection hoods made of perforated stainless steel panels or aluminum
Footrests without dowel holes
Conveyor system with adjustable speed
Plastic modular belt with anti-skip rubber surfaces at the bottom side
Lateral guides above transport conveyor, manual adjustable 6-lanes
Top belt height, manual adjustable
Slicer -Upper infeed by belt, two belts per disc slicer, common drive - 5 disc slicers
Disc slicer unit swiveable, spring-loaded
Disc slicer unit with additional sensor with mechanical safety locking for openings
Central drive for disc slicer(s) with frequency-converter adjustable speed
Driven disc slicer adjustment: position of cut in height
Disc slicer adjustment by handwheel in crosswise direction, 5 disc slicers
Positions of disc slicers is crosswise centrically adjustable by handwheel, position of the center disc slicer is fixed - uneven number of disc slicers
Signal lamp - red / green
Switch cabinet with hasp locking
Switch cabinet with fan+filter system - standard-
Operating elements located in the machine panel or door of the switch box
Contactor control system with switches
Frequency converter Hitachi
Electric execution according to CE-specification
Package `Standard` -preparation for up to 5 different products
Operating language and labels in German language
Operating manual in German language
Documentation in German language
Options

Extended frame design at the infeed side for transport devices, stainless steel
Extended frame design at the outfeed side for transport devices, stainless steel
Footrests on rollers
Lateral guides, lattice with manual adjustment
Removeable spinners for cluster products before disc slicing
Manual height adjustment of cutting position and product height
Switch cabinet with air-conditioning
Frequency converter SEW inside the switch cabinet
Frequency converter Allen Bradley
Voltage modulation, 3-phase
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual
ds layout

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

Sesam Burger geschnitten
Burger geschnitten

DS

Automatic slicing machine for baguettes, hot dog and hamburger buns. The incoming products are transferred to an upper and lower belt and sliced using centrally driven circular knives.

All guides and the upper belt are adjustable without tools.

The machine frame and all casings are made of stainless steel – important for long value preservation and good for easy and hygienic cleaning. Various slicing arrangements enable a hinge cut to be made on all tracks simultaneously, or bar cuts to be made simultaneously with a reduced number of tracks.

Technical specifications

Dimensions: Length: approx. 1500 -1900 mm, Width: customer specific, Working height approx. 1000 mm
Product dimensions: Diameter / width: min. approx. 50 mm, Height: 20 - 80 mm
Capacity: approx. 10.000 products/h per lane
Speed disc slicer adjustable
Dia. Cutting disc customer specific
Speed: adjustable
Controller: Contractor control
Operating panel: Switches and buttons (line control- touchscreen)
24 V, DC
Frequency controller: Hitachi
Pneumatic system: Festo
Power supply: 230/400 Volts / 50 cycles
Power input: approx. 2 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Operating side: left / right
Protection class: IP 54
Adjustment: manual