Images
Schälmaschine BS 20

BS 20, peeling machine

Schälmaschine BS 20 Bandmesser

Continuously adjustable belt blade speed.

BS 20 Schneideinheit

Cutting unit: The product feed consists of 4 conveying elements, which guide the product safely on all sides for the cutting process.

Integriertes Transportband für Abschnitte

Integrated conveyor belt for sections.

Standard specification

Welded machine frame, stainless steel, standard
Panels, doors and electrical cabinet or switchbox made from stainless steel
Cover panels with hasp locking
Protection hoods made of polycarbonate
Slides and/or funnels for bread crumbs
Footrests without dowel holes
Conveyor system with adjustable speed
Drive for slicer(s) with frequency-converter adjustable speed
Vertical peeling station for two product sides - 1st unit
Slicer - Bottom infeed: Transport belt with with structure
Slicer -Infeed: Side guiding by driven belts
Lateral guides, manual adjustable
1-lane, PU-transport belt at the upper side with structure, w=50 mm, height manual adjustable by handwheel
Disc slicer adjustment by handwheel: position of cut in width
Disc slicer adjustment by handwheel: position of cut
Slicing with dry blades
Refuse of endpieces / heels
Conveyor belt with 90° turning alignment
Side lateral guides, plain stainless steel, manual adjustable
Vertical peeling station for two product sides - 2nd unit
Slicer - Bottom infeed: Transport belt with with structure
Slicer -Infeed: Side guiding by driven belts
Lateral guides, manual adjustable
1-lane, PU-transport belt at the upper side with structure, w=50 mm, height manual adjustable by handwheel
Disc slicer adjustment by handwheel: position of cut in width
Disc slicer adjustment by handwheel: position of cut
Slicing with dry blades
Refuse of endpieces / heels
Set of band blades for BS 10 / BS20 2x
Spare set of band blades for BS 10 / BS20 2x
Equipment stops in case of blade break
Slicing compartment with additional sensors with mechanical safety locking for openings
Outfeed with plastic modular belt conveyor, closed smooth surface, driven
Turning star for crosswise transfer, stainless steel wide spiral link belt for outfeed transport
Non-stick coating for machine components which get in touch with the cut surface of product
Signal lamp - red / green
Signal horn
Switch cabinet with hasp locking
Switch cabinet with fan+filter system - standard-
Comfort-operating panel, rotatable with support arm system
Controls + touchpanel Omron
Frequency converter Hitachi
Electric execution according to CE-specification
Operating language and labels in German language
Operating manual in German language
Documentation in German language
Options

Protection hoods made of perforated stainless steel panels
Feeder with three-part conveyor as turning device 90°
Illumination of the working area inside the machine
One conveyor to one machine side for outlet bread crumbs
Two conveyors to a central outfeed point for outlet bread crumbs
Switch cabinet with service interface FrontCom® with LAN and power socket
Additional signal lamp
Switch cabinet with air-conditioning
Frequency converter SEW inside the switch cabinet
Frequency converter Allen Bradley
Remote service, VPN-Switch INSYS , (Master unit)
Voltage modulation, 3-phase
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual
BS 20
BS20-Linie

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

Toastbrot
Toastbrot
Toastbrot

BS 20

The BS 20 peeling machine has been developed to separate the bread crust from box-shaped white breads. The crust is cut off in several steps depending on the product. Breads are continuously fed in lengthwise. In the first step, the bread is peeled parallel on both sides by a pair of belt blades and then tilted 90°. A second pair of belt blades then peels the other lengthwise sides in parallel. The sections are centrally conveyed.

The BS 20 automatic peeling machine is ideally suited for combination with Hartmann slicing machines that remove the end faces during the slicing process. The product formats and slicing positions can be adjusted continuously without tools. The belt blade speeds can be adjusted.

Generously dimensioned doors and hoods enable good cleaning and maintenance access along with rapid blade changing.

Technical specifications

Dimensions: Length: 4820 mm, Width: 1370 mm, Height 2000mm
Weight: 1000 kg
Product dimensions: Length: 250 - 460 mm, Width: 85 - 150 mm, Height: 85 - 150 mm
Capacity: up to 3300 loaves/ h
Speed: adjustable
Speed of the slicer: adjustable
Belt cutter length: 76 inch / approx. 1,9 m
Controller: Omron
Operating panel: Switches and buttons
24 V, DC
Frequency controller: Hitachi
Pneumatic system: Festo
Power supply: 230/400 Volts / 50 cycles
Power input: approx. 4 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Operating side: left / right
Protection class: IP 54
Adjustment: manual