VS 320 SV 12 T

Packaging machine VS 320 SV 12 T

Images
VS 320 SV 12 T

VS 320 SV 12 T, automatic packaging machine

ABM

Automatic "ABM" bag magazine - bag replenishment can be carried out while the machine is running.

Absaugung

Device for suction extraction of the film sections

Siegelbalken

Sealing with sealing bars: the pulse-controlled sealing station ensures exact sealing results.

Infeed

Infeed: flexibly adjustable light barriers for fast product adjustment.

Kühlung

Solid pump system for cooling the sealing bar.

Spreizbleche

Always at hand: the spreader plates are stored on the inside of the door.

Standard specification

Welded machine frame, lacquered in stainless steel design colour, standard
Panels, doors and electrical cabinet or switchbox made from stainless steel
Cover panels with hasp locking
Protection hoods made of polycarbonate
Footrests without dowel holes
Conveyor system with servo driven speed
Transfer line with pusher dogs, base plate made from plain stainless steel
Lateral guides, plain stainless steel
Lateral guides above transfer line, manual adjustable by handwheel
Top pressure cussion and bag spreading instead of bag aspiration
Integrated side channel blower device
Upper product holder - twin
Bottom product holder
In line bag lifting device
Set of spreading plates for bag opening
Non-stick coating for machine components which get in touch with the product
Automatic bag magazine for extra-fast stack changeover `ABM-70 Twin S `, 70 mm stack height for straight U-shaped brackets and cropped U-shaped brackets
Automatic infeed and positioning of the next batch of bags
Automatic controlled switch-off at empty bag magazine
Protection hood for bag magazine - Stainless steel triangle hood and curtain (In combination with sealing system)
Sealing aggregate, pulsed heating of sealing wires - PE-foils
Cutting off the foil overhang after sealing
Suction device for cut off foil residues
Special in line discharge conveyor, 2 lanes for flat, round bread
Sterile filter for sterilization the compressed air coming into contact with the products
Signal lamp - red / green
Signal horn
Switch cabinet with hasp locking
Switch cabinet with air-conditioning
Comfort-operating panel, rotatable with support arm system
Controls + touchpanel Allen Bradley
Servocontroller Yaskawa
Remote service, VPN-Switch INSYS , (Master unit)
Voltage modulation, 3x 1 phase, input 480V
Isolating transformer
Electric execution according to UL-specification
Operating language and labels in English language
Operating manual in English language
Documentation in English language
Options

Welded machine frame, stainless steel, standard (crank-rockers made of galvanised steel)
Protection hoods made of perforated stainless steel panels
Extension (915 mm) for inline infeed. Additional space for manual infeed
Additional set of exchange spreading plates for bag opening
Illumination of the working area inside the machine
Preparation to implement a Kwik-Lok® printer system, printer installation by the customer
Sealing aggregate, permanent heated sealing plates, non-stick coated - PP-foils
Product control on discharge conveyor and press jaw, adjustable by hand wheel
In line discharge: Accelerator belt , length 750 mm, foldaway, fixed at machine door
Switch cabinet with service interface FrontCom® with LAN and power socket
Additional signal lamp
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual
VS320SV12T

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

What is the difference between packaging and sealing?

Packaging means: positioning products automatically in a bag, extracting residual air from the bag, closing the bag close to the product inside the packaging machine.

Closing means: The products are either introduced externally into the bag or manually inserted into the bag on the device.
Some devices suck the residual air out of the bag, after which the bag automatically closes inside the device.

What is the difference between a type GBK and type VS?

 

In the case of the GBK type, standing disks are packed, while the VS type packs lying disks. Both systems are able to package other types of products and products grouped differently.

GBK type

- Standing discs
- Whole breads
- Grouped products fast food

VS type

- lying discs
- Stacked flat breads (tortilla, arabic bread, pitta)
- Grouped products

Image removed.

How can I determine the size of bags?

Bag sizes depend on the products and the orientation of the products in the bag.

In any case, the product tolerances must be considered. This is especially important when several products are packed side by side, one after the other or one above the other in a single package. A beautiful packaging fits as closely as possible to the product and supports the product. The sizes recommended by GHD Hartmann can be looked up in an Excel spreadsheet.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

Which bag closures can GHD Hartmann offer?

The type of bag closure depends on the machine type. Some devices are designed exclusively for one type of closure, others can be delivered with different closure systems. A machine can only be executed with a kind of bag closure. Later conversions are partly possible.

Clip closure: The closure used very often in Europe. Cost effective with the possibility of printing on the closure. Good to use for PE bags, PP bags and paper bags.

Hart-Lock / Kwik-Lok®: Widely used in North America and Asia. No metal component in the closure, but difficult or undetectable. Unsuitable for paper bags. A printing of the closure is possible.

Tape - Closure: In the United Kingdom, in English-speaking countries and occasionally in Africa, the tape closure is applied. Hartmann offers this type of closure in packaging machines and specially designed sealing devices. A printing of the tape closure is possible.

Sealing / Welding: The sealing of bags with a sealing system is available for different machine types. Here is to pay attention to the nature of the packaging material and its welding properties. For pillow packs, the sealing of packaging films takes place on the longitudinal and transverse sides. Depending on the machine type, the film projections are cut off during sealing.

Quality closure: In addition to the clip closure or Kwik-Lok ®, a quality closure can optionally be introduced within the GHD Hartmann packaging machine. This closure is either one or two rows and switchable. It increases the security against external manipulation in sales.

Twist - Closure: Widely used in South America and the English-speaking world. GHD Hartmann can not offer an integration within the packaging machines. This closure is placed after packing the products in the bag with a separate device. The removal of air from the bags when closing is technically not possible here.

Tortilla

VS 320 SV 12 T

Fully automatic bag packaging machine for tortilla stacks. The machine's product-specific design meets the varied international packaging requirements. Tortilla stacks are packed into foil bags and sealed tightly inside the machine in a single operation.

The drive concept of the VS 320 SV 12 T machine guarantees a constant switching point accuracy for all functions and reduces maintenance to a minimum. By consistently separating the product work area from the drive, this machine design also meets all cleanroom requirements. Drive technology in a wide range via servo drives.

Technical specifications

Dimensions: Length: approx. 4300 mm, Width: approx. 2050 mm, Heigth: approx. 1800mm, Working height: approx. 955 mm
Weight: 1600 kg
Product dimensions: Length: 60 - 310 mm, Width: up to 310 mm, Height: 20 - 150 mm
Capacity: up to 3600 Packages/h
Speed: adjustable
Controller: Allen Bradley
Operating panel: Touchscreen
24 V, DC
Frequency controller: Allen Bradley
Servo-controler: Allen Bradley
Pneumatic system: Festo
Power supply: 480 Volts / 60 cycles
Power input: 4 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Pre-manufactured plastic bags (PE, else on demand)
Operating side: left / right
Protection class: IP 54
Adjustment: manual
Special: Only for sealing closure