SLVS

Utilities Line Distribution System SLVS

Images
Versorgungseinrichtungen

Higher level utilities are required with each line distribution system to enable safe operation.

Display

Display of a touchscreen line control.

Display 2

Customer-specific representation of the control options.

Schaltplan

Schematics, control programs and related documentation from a single source.

Schaltschrank 1

Control cabinet construction with Hartmann quality.

Schaltschrank 2

Line distribution systems are checked and tested at GHD Hartmann prior to delivery.

Standard specification

Footrests without dowel holes
Operating elements located in the machine panel or door of the switch box
Switch cabinet with fan+filter system - standard-
Cover panels with hasp locking
Signal lamp - red / green
Signal horn
Design and preparation of control program preparation for the customer-specific overall system at GHD
Project related planing, lay-out preparation, expenses for customer specific project processing
Controls + touchpanel Omron
Electric execution according to CE-specification
Operating language and labels in German language
Operating manual in German language
Documentation in German language
Options

Comfort-operating panel, rotatable with support arm system
Increased basement for switch cabinets, tubular stainless steel frame, h=200 mm
Sloping roof for the switch cabinet (30°), closed design
Switch cabinet with air-conditioning
Additional operating panel - build in a seperate control stand
Additional comfort-operating panel, with add-on rotatable with support arm system
Cable tray, open design
Closed cable tray
Screwed tube for cable tray, total
Compressed air energy meter (SD 6000), data displayed on the touch screen
Switch cabinet with service interface FrontCom® with LAN and power socket
Additional signal lamp
Cable labeling with engraved signs, metal detectable
Potential-free contacts for circuit signaling with local components
Electric power consuption meter (1102677), data displayed on the touch screen
Remote service, VPN-Switch INSYS , (Master unit)
Connection to the central communication system. Customer specific depending on control system, amount of machines and amount of different data
Voltage modulation, 3-phase
Transformer to modulate a neutral conductor
Isolating transformer
Overvoltage protection
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

SLVS

The Hartmann Line Distribution System contains all the components needed to control Hartmann conveying and handling systems, which are required for distributing, buffering or feeding products in an overall system. In addition to the electrical hardware with main switch, cable guides for power supply and control cables and switching devices also the corresponding control is included.

Technical specifications

Dimensions: Customer specific
Controller: Omron
Operating panel: Touchscreen
Frequency controller: Customer specific
Pneumatic system: Festo
Power supply: 400 Volts , 50 cycles
Power input: Customer specific
Compressed air: min. 6,0 bar (ISO 8573-1)
Protection class: IP 54