Images
Linienverteiler LV

LV line distributor for product distribution. The picture shows the LV 1/6 S modem for distribution with a distribution arm on 6 discharge tracks.

Linienverteiler LV

LV 1/6 S, line distributor, open.

Linienverteiler LV Einlaufband

A gap is created between the individual products in the infeed.

Linienverteiler LV Verteilarme

Optional: Line distributor with up to four independently controlled distributors.

Linienverteiler LV Zulauf

Central inlet with combined product adjustment.

Linienverteiler LV Verteiltechnik

Product-sparing distribution technology.

Linienverteiler LV in motion

Distribution arms position exactly in front of the defined outlets.

Formate

Easy adjustment of product formats.

Standard specification

Welded machine frame, stainless steel, overall width transport system 1300 mm
Panels, doors and electrical cabinet or switchbox made from stainless steel
Cover panels with hasp locking
Protection hoods made of polycarbonate
Footrests without dowel holes
Conveyor system with adjustable speed
Conveyor system with servo driven speed (for swinging arm, line divider)
Plastic modular belt below divider swing arm device
Driven swinging arm divider, 1 lane
Side-Exit for products, 2-lane
Signal horn
Switch cabinet with hasp locking
Switch cabinet with fan+filter system - standard-
Omron controls + touchpanel in the bagging machine
Frequency converter Hitachi
Servocontroller Yaskawa (for swinging arm, line divider)
Electric execution according to CE-specification
Operating language and labels in German language
Operating manual in German language
Documentation in German language
Options

Switch cabinet with service interface FrontCom® with LAN and power socket
Additional signal lamp
Switch cabinet with air-conditioning
Frequency converter SEW inside the switch cabinet
Frequency converter Allen Bradley
Voltage modulation, 3-phase
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual
LV 26S
LV Zeichnung

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

Bagel 1
Hamburger
HotDog
Brötchen

LV

Automatic line distributor for fast, continuous product distribution between different function groups. Individual products are fed to the line distributor in one or more tracks, depending on the design. A gap is created between the products in the line distributor. Separately driven distribution arms distribute a single infeed track over a larger number of discharge tracks. The product flow is interrupted during pivoting. An emergency outlet is available for each distribution arm, to which products can be discharged if required.

Technical specifications

Dimensions: Length: approx. 2600-3500 mm, Width: approx. 1300-2000 mm, Height: 2000mm, Working height: 1050 mm
Weight: 1800 - 2500 kg
Product dimensions: Length: min 90 mm, Diameter / width: min. approx. 50 mm, Height: 20 - 80 mm
Capacity: per line divider arm up to 15000 products/ h
Speed: adjustable
Controller: Omron
Operating panel: included in overall line control SLVS or related system
24 V, DC
Frequency controller: Hitachi
Servo-controler: Yaskawa
Pneumatic system: Festo
Power supply: 230/400 Volts / 50 cycles
Power input: approx. 2 - 2,5 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Operating side: left / right
Protection class: IP 54
Adjustment: manual