AL ID

AL ID, autoload cross pusher with rotation

Images
AL IQ

Autoload loading machine for transverse feeding, optionally with turning.

Standard specification

Welded machine frame, lacquered in stainless steel design colour, overall width transport system 1500 mm
Panels, doors and electrical cabinet or switchbox made from stainless steel
Cover panels with hasp locking
Protection hoods made of polycarbonate
Footrests without dowel holes
Drive by master shaft from following HARTMANN-machine
Plastic modular belt for line divider
Stainless steel lateral guides above line divider, manual adjustable
Plastic modular belt, feeding upper layer (1st compartment)
Pneumatic driven lifting device for swiveable transport system (2nd. device)
Stainless steel lateral guides above transport line, manual adjustable
Servo driven crosswise rake device with turning device 90°, multi-lane into 1-lane, installed above the transport system
Plastic modular belt, feeding upper layer (2nd compartment)
Stainless steel lateral guides above transport line, manual adjustable
Servo driven crosswise rake device with turning device 90°, multi-lane into 1-lane, installed above the transport system
Switch cabinet with hasp locking
Switch cabinet located on top of the machine frame
Switch cabinet with fan+filter system - standard-
Comfort-operating panel, rotatable with support arm system
Controls + touchpanel Omron
Servocontroller Yaskawa
Electric execution according to CE-specification
Package `Standard` -preparation for up to 5 different products
Operating language and labels in German language
Operating manual in German language
Documentation in German language
Options

Switch cabinet with air-conditioning
Voltage modulation, 3-phase
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual
ALID Hartmann

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

Brötchen
Hotdog hoch

AL ID

Device for automatic feeding and stacking of grouped products such as baguettes, hot dog or hamburger buns into a packaging machine. The products are fed into the machine in two groups.

The first group of products is conveyed straight ahead to a station where the products are pushed laterally by a cross pusher into the packaging machine's transport chain. Depending on the packaging scheme, the products can be rotated by 90° during cross pushing.

The second group of products is conveyed to an elevated station, where the products are fed laterally by a cross pusher atop the first group of products that are already in the packaging machine's transport chain. This cross pusher can also feed this product group rotated by 90°.

Technical specifications

Dimensions: Length: approx. 3000 mm, Width: approx. 1500 mm, Working height approx. 1050mm
Product dimensions: Diameterr: min. 4 inch (92 mm), max. 5 inch (130 mm), Height min. 20 mm, max. ca. 35 mm
Capacity: approx. 40-65 product layers/min per infeed position, depending on products
Speed: adjustable, depending on the packaging machine
Controller: Omron
Operating panel: Touch panel /Touch panel of the packaging machine
24 V, DC
Frequency controller: Hitachi
Servo-controler: Yaskawa
Pneumatic system: Festo
Power supply: 230/400 Volts / 50 cycles
Power input: approx. 1 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Operating side: left / right
Protection class: IP 54