AL FB2

AL FB2, autoload compartment belt

Images
ALFB2

AL FB2 double compartment belt.

Fächersystem

System for product alignment.

Standard specification

Welded machine frame, lacquered in stainless steel design colour, standard
Panels, doors and electrical cabinet or switchbox made from stainless steel
Cover panels with hasp locking
Protection hoods made of polycarbonate
Footrests without dowel holes
2-lane accumulating plastic roller carpet, Azetal, driven
Side lateral guides, plain stainless steel, manual adjustable
Plastic modular curved belt for product feeding in front of the compartment system (lane 1)
Plastic modular curved belt for product feeding in front of the compartment system (lane 2)
2-lanes, driven accelerator belts, smooth plastic belt conveyor
Lateral guides, plain stainless steel
Servo driven compartment cassette system and turning device for products by 90° (2 lanes)
Driven crosswise rake devices, 2-lanes, installed above the transport system
Extensionfor inline infeed.
Drive by master shaft from following HARTMANN-machine
Product outfeed with lateral guides, manual adjustable
Stainless steel lateral guides with horizontal plastic support flaps
Switch cabinet with hasp locking
Control unit integrated in the bagging machine
Frequency converter Hitachi
Servocontroller Yaskawa for compartment system
Electric execution according to CE-specification
Operating language and labels in German language
Operating manual in German language
Documentation in German language
Options

Welded machine frame, stainless steel, standard
Frequency converter SEW inside the switch cabinet
Frequency converter Allen Bradley
Voltage modulation, 3-phase
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual
ALFB2

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

runde Cracker
Kekse

AL FB2

Fully automatic system for forming standing product stacks for flat products. The products are fed stacked horizontally and rotated vertically by 90°. Depending on the recipe, multiple quantities of the product stacks are transferred together as a standing stack to a subsequent packaging machine.

 

The device enables simultaneous two-track feeding and common grouping.

Technical specifications

Dimensions: Length: approx. 4100 mm, Width: approx. 1200 mm, Working height approx. 1050mm
Product dimensions: Length: 80 - 120 mm, Width: 80 - 120 mm, Height: 10 - 25 mm
Capacity: approx. 2 x 40 stacks/ min depending on products
Speed: adjustable
Controller: Omron
Operating panel: Touch panel of the rellated packaging machine
24 V, DC
Frequency controller: Hitachi
Pneumatic system: Festo
Power supply: 230/400 Volts / 50 cycles
Power input: approx. 1,5 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Operating side: left / right
Protection class: IP 54