Images
EC 101 I

EC 101 I closing unit

EC 101 I  HPD

Optional: "HPD" foil printer for printing on plastic clip tape.

Standard specification

Welded machine frame, lacquered in stainless steel design colour, standard slope 30°
Panels, doors and electrical cabinet or switchbox made from stainless steel
Cover panels with hasp locking
Protection hoods made of polycarbonate
Footrests without dowel holes
Drive with frequency converter
Lateral guides above transfer line, manual adjustable by handwheel
Bag air aspiration device
Integrated side channel blower device
Clip closing aggregate
Single spool for closure rolls
Closure spooling installed INSIDE the machine
Outfeed with slide
Switch cabinet with hasp locking
Switch cabinet with fan+filter system - standard-
Operating elements located in the machine panel or door of the switch box
Omron controls + switches
Frequency converter Hitachi
Electric execution according to CE-specification
Operating language and labels in German language
Operating manual in German language
Documentation in German language
Options

Welded machine frame, lacquered in stainless steel design colour, standard slope 20°
Welded machine frame, lacquered in stainless steel design colour, special slope 45°
Welded machine frame, lacquered in stainless steel design colour, special slope 60°
Welded machine frame, stainless steel, standard slope 20°
Welded machine frame, stainless steel, standard slope 30°
Welded machine frame, stainless steel, special slope 45°
Welded machine frame, stainless steel, special slope 60°
Protection hoods made of perforated stainless steel panels
Compartment chain - adjustable in width
Brushing rollers for smoothing the bag before closing
Double spool for closure rolls
HPD-Printing on the clip, 6-digit
HPD-Printing on the clip, 9-digit
HPD-Printing on the clip, 13-digit
Kwik-Lok® aggregate for Kwik-Lok® type J-NRP
Customer-specific applicator for labeling
HPD-Printing on Kwik-Lok®, 6-digit
Additional signal lamp
Switch cabinet with air-conditioning
Frequency converter SEW inside the switch cabinet
Frequency converter Allen Bradley
Voltage modulation, 3-phase
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual
EC101I

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

What is the difference between packaging and sealing?

Packaging means: positioning products automatically in a bag, extracting residual air from the bag, closing the bag close to the product inside the packaging machine.

Closing means: The products are either introduced externally into the bag or manually inserted into the bag on the device.
Some devices suck the residual air out of the bag, after which the bag automatically closes inside the device.

How can I determine the size of bags?

Bag sizes depend on the products and the orientation of the products in the bag.

In any case, the product tolerances must be considered. This is especially important when several products are packed side by side, one after the other or one above the other in a single package. A beautiful packaging fits as closely as possible to the product and supports the product. The sizes recommended by GHD Hartmann can be looked up in an Excel spreadsheet.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

What is a quality seal?

By "quality closure" is meant the single or double row perforation sealing of the bag ruffle. The bag can not be opened without breaking the seal.

Customers can thus control possible manipulations of the packaging or the products on the shop shelf.

The quality seal is not a hermetic seal.

Qualitätsverschluß

 

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

Which bag closures can GHD Hartmann offer?

The type of bag closure depends on the machine type. Some devices are designed exclusively for one type of closure, others can be delivered with different closure systems. A machine can only be executed with a kind of bag closure. Later conversions are partly possible.

Clip closure: The closure used very often in Europe. Cost effective with the possibility of printing on the closure. Good to use for PE bags, PP bags and paper bags.

Hart-Lock / Kwik-Lok®: Widely used in North America and Asia. No metal component in the closure, but difficult or undetectable. Unsuitable for paper bags. A printing of the closure is possible.

Tape - Closure: In the United Kingdom, in English-speaking countries and occasionally in Africa, the tape closure is applied. Hartmann offers this type of closure in packaging machines and specially designed sealing devices. A printing of the tape closure is possible.

Sealing / Welding: The sealing of bags with a sealing system is available for different machine types. Here is to pay attention to the nature of the packaging material and its welding properties. For pillow packs, the sealing of packaging films takes place on the longitudinal and transverse sides. Depending on the machine type, the film projections are cut off during sealing.

Quality closure: In addition to the clip closure or Kwik-Lok ®, a quality closure can optionally be introduced within the GHD Hartmann packaging machine. This closure is either one or two rows and switchable. It increases the security against external manipulation in sales.

Twist - Closure: Widely used in South America and the English-speaking world. GHD Hartmann can not offer an integration within the packaging machines. This closure is placed after packing the products in the bag with a separate device. The removal of air from the bags when closing is technically not possible here.

Does GHD Hartmann supply its own printer devices?

GHD Hartmann supplies HPD printers with between 6 and a maximum of 13 positions for printing on the clip band. For Hart-Lok or Kwik-Lok (R), a 6-digit HPD printer from Hartmann can be offered.

Clip

 

 

GHD hartmann HPD-Drucker

Toast verpackt
HotDogs verpackt

EC 101 I

This closing device is equipped with a long machine frame and its own impulse-controlled drive. It can easily be combined with vertical or horizontal packaging machines (tubular bag machines). It is ideal for manual loading because of its intermittent mode of operation. It is also not necessary to synchronise it with the upstream filling machine. At an angle of inclination of 20°, 30° or optionally 45° and 60 degrees, the bags are discharged via a transversely positioned product conveyor belt.

An integrated vacuum device in the closing station sucks the excess air out of the bags for an enabling tidy, tight packaging. The product bags are then closed in the closing station and discharged.

Technical specifications

Dimensions: Length: more than 1800 mm, Width: approx. 1060 mm, Height: approx. 1900 mm, Infeed height: approx. 950 mm
Weight: 600 - 750 kg
Product dimensions: Length: up to 400 mm, Width: up to 220 mm, Height: up to 120 mm
Capacity: up to 3600 packages /h
Speed: adjustable
Controller: Omron
Operating panel: Switches and buttons
24 V, DC
Frequency controller: Hitachi
Pneumatic system: Festo
Power input: approx. 2 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Pre-manufactured plastic bags, or paper bags (paper with clip closure only)
Operating side: left / right
Protection class: IP 54
Adjustment: manual