AL FB1

Single compartment belt system - AL FB1

    Pictures
    Fächerband

    Compartment belt for erecting the products.

    ALFB1 Hartmann
    Standard specification
    
    Welded machine frame, lacquered in stainless steel design colour, standard
    Panels, doors and electrical cabinet or switchbox made from stainless steel
    Hasp locking for cover panels
    Protection hoods made of polycarbonate
    Footrests without dowel holes
    1-lane accumulating plastic roller carpet, Azetal, driven
    Side lateral guides, plain stainless steel, manually adjustable
    Plastic modular curved belt for product feeding in front of the compartment system
    1-lanes, driven accelerator belt, smooth plastic belt conveyor
    Lateral guides, plain stainless steel
    Servo driven compartment cassette system and turning device for products by 90° (1 lane)
    Driven crosswise rake device, 1-lane, installed above the transport system
    Extended GBK-product table within the machine frame
    Drive by master shaft from following HARTMANN-machine
    Product outfeed with lateral guides, manually adjustable
    Stainless steel lateral guides with horizontal plastic support flaps
    Sterile filter for sterilization the compressed air coming into contact with the products
    Switch cabinet with hasp locking
    Switch cabinet with fan+filter system - standard-
    Control unit integrated in the bagging machine
    Frequency converter Hitachi
    Servocontroller Omron for compartment system
    Electric execution according to CE-specification
    Operating language and labels in German language
    Operating manual in German language
    Spare parts catalogue in German language
    Options
    
    Welded machine frame, stainless steel, standard
    Frequency converter SEW
    Frequency converter Allen Bradley
    Voltage modulation, 3-phase
    Electric execution according to UL-specification
    Customer-specific special machine modifications
    Customer-specific operating language and labels
    Customer-specific operation manually
    Remote video URL

    Can the machine be cleaned wet?

    The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

    Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

    Change kits allow cleaning and preparation in addition to the production operation.

    Are brochures in other languages available?

    Further brochures in other languages ​​are available here. The technical state may not be updated!

    How loud is a machine by GHD Hartmann?

    The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

    Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

    The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

    As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

    Which controls can GHD Hartmann Maschinenbau offer?

    In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

    Siemens or Allen Bradley are available as options.

    What compressed air quality is recommended for machine use in the food industry?

    According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

    Smöre
    Smörebröt
    rund

    AL FB1

    Fully automatic system for forming standing product stacks for flat products. The products are fed stacked horizontally and rotated vertically by 90°. Depending on the recipe, multiple quantities of the product stacks are transferred together as a standing stack to a subsequent packaging machine.

    Technical specifications
    
    Dimensions: Length: approx. 3400 mm, Width: approx. 1200 mm, Working height approx. 1050mm
    Product dimensions: Length: 80 - 120 mm, Width: 80 - 120 mm, Height: 10 - 25 mm
    Capacity: approx. 40 stacks/ min depending on products
    Speed: adjustable
    Controller: Omron
    Operating panel: Touch panel of the rellated packaging machine
    Control voltage: 24 V, DC
    Frequency controller: Hitachi
    Pneumatic system: Festo
    Power supply: 230/400 Volts / 50 cycles
    Power consuption: approx. 1,5 kW
    Compressed air: min. 6,0 bar (ISO 8573-1)
    Operating side: left / right
    Protection class: IP 54