GS 60

Reciprocating slicer machine - GS 60

    Pictures
    GS 60

    GS 60 reciprocating slicer machine

    GS 60

    GS 60 reciprocating slicer machine, open

    Zugang GS60

    Good accessibility for cleaning and changing the blade frames.

    GS 60 Messerrahmen

    Blade frame: both the feeding and slicing speed are adjustable.

    Outfeed GS60

    Outfeed: speed is continuously adjustable and thus can be synchronised with the packaging machine.

    Präzise Messerführung

    Reciprocating slicer system with precise slice thicknesses.

    GS 60
    GS 60
    Zugang GS60
    GS 60 Messerrahmen
    Outfeed GS60
    Präzise Messerführung
    GS 60
    Linie GS60 + VS320+EC 108
    GS60-Linie
    GS 60
    Linie GS60 + VS320+EC 108
    GS60-Linie
    Standard specification
    
    Welded machine frame, stainless steel, standard
    Panels, doors and electrical cabinet or switchbox made from stainless steel
    Hasp locking for cover panels
    Protection hoods made of polycarbonate
    Footrests without dowel holes
    Slicer-blade drive 3 kW
    Conveyor system with adjustable speed
    Lateral guides in front of product infeed, manually adjustable
    Product infeed with lateral guides, manually adjustable by handwheel
    Top belt height manually adjustable by handwheel
    Slicer - Bottom infeed: Plastic modular belt with anti-skip rubber surfaces
    Slicer -Infeed: Side guiding by driven belts
    Slicer -Upper infeed by belt, products between 160 - 400 mm
    Infeed driven movable better access for cleaning and blade set-up
    Blade stroke 77 mm
    Cutting frames with guiding plates for one constant slice thickness
    Set of tools for blade exchange - Torque spanner and clamping lever
    Spare blade set for reciprocate slicer 70 pcs.
    Blade tensioning device with pre-adjusted spring-force
    Equipment stops in case of blade break
    Hand slider (POM with stainless steel handle)
    Non-stick coating for machine components which get in touch with the product
    Plate at the infeed side of the slicer Outfeed
    Slicer-Outfeed equipped with chain conveyor with pusher bars, base plate made from structured non-stick coated stainless steel.
    Product outfeed with lateral guides, manually adjustable by handwheel
    Catching tray for crumbs below outfeed position, extendable drawer, stainless steel
    Signal lamp - red / green
    Signal horn
    Switch cabinet with hasp locking
    Switch cabinet with air-conditioning
    Comfort-operating panel, rotatable with support arm system
    Controls + touchpanel Omron
    Frequency converter Hitachi
    Electric execution according to CE-specification
    Operating language and labels in German language
    Operating manual in German language
    Spare parts catalogue in German language
    Options
    
    Protection hoods made of perforated stainless steel panels
    Slicer-blade drive 5,5 kW
    Accumulating belt in front of the Infeed, stainless steel roller carpet (l= 1m)
    3 Sensors to detect twisted products - installed above the transport system
    2-lane-product feeding with individual upper belts and bottom belts. Adjustable side guides. Including product sensoring
    Blade stroke 20 mm
    Blade stroke 50 mm
    Blade stroke 100 mm
    Additional cutting frames with guiding plates for one constant slice thickness
    Storage Trolley for up to 4 sets of additional cutting frames
    Refuse of endpieces / heels. Adjustable plate in front of the slicer Outfeed
    Outfeed with curved side guides to feed a flowpacking machine
    Switch cabinet with service interface FrontCom® with LAN and power socket
    Additional signal lamp
    RFID - Panel access authorization per chip, 10 pieces with up to 5 authorization levels
    RFID - Additional chip, 10 pcs. with up to 5 authorization levels
    Omron control unit OPC-UA ready
    Frequency converter Allen Bradley
    Remote service, VPN-Switch INSYS, (Master unit)
    Voltage modulation, 3-phase
    Electric execution according to UL-specification
    Customer-specific special machine modifications
    Customer-specific operating language and labels
    Customer-specific operation manually
    Remote video URL

    Can the machine be cleaned wet?

    The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

    Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

    Change kits allow cleaning and preparation in addition to the production operation.

    Are brochures in other languages available?

    Further brochures in other languages ​​are available here. The technical state may not be updated!

    Is it possible to combine a GHD Hartmann Schneider with other packaging machines?

    Of course, our bread slicers can not only be combined with capping and packaging machines from GHD Hartmann, but also with machines from other manufacturers.

    Take advantage of our many years of experience for optimum coordination and connection.

    How loud is a machine by GHD Hartmann?

    The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

    Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

    The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

    As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

    Which controls can GHD Hartmann Maschinenbau offer?

    In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

    Siemens or Allen Bradley are available as options.

    What compressed air quality is recommended for machine use in the food industry?

    According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

    Marmorkuchen
    Rosinenstuten

    GS 60

    The GS 60 reciprocating slicer machine is a high-performance slicing machine for bread, sugary products, fruit bread and raisin breads. It cuts the products into slices of exactly the same size due to the vertical blade arrangement. The GS 60 is designed for continuous operation. The basis for this high performance is a Hartmann gearbox, which is equipped with special lubrication. In order to ensure optimum synchronisation with the packaging machine, the discharge conveyor is equipped with its own frequency-controlled drive. Combining it with the Hartmann packaging machines results in a perfectly coordinated overall solution with high flexibility and production reliability.

    Technical specifications
    
    Dimensions: Length: 2700 mm, Width: 1100 mm, Height 1620mm
    Weight: 1100 kg
    Product dimensions: Length: 160 - 400 mm, Height: 50 - 170 mm
    Capacity: up to 3600 products/ h
    Speed: adjustable
    Speed of the slicer: adjustable
    Controller: Omron
    Operating panel: Touchscreen
    Control voltage: 24 V, DC
    Frequency controller: Hitachi
    Pneumatic system: Festo
    Power supply: 230/400 Volts / 50 cycles
    Power consuption: approx. 3,5 kW
    Compressed air: min. 6,0 bar (ISO 8573-1)
    Operating side: left / right
    Protection class: IP 54
    Adjustment: manual /driven