Pictures
    DS

    DS multiple disc slicer

    DS, offen

    DS multiple disc slicer, open.

    DS Verstellung

    Central adjustment for blade positions in height and slicing depth.

    DS

    Good accessibility for maintenance and cleaning.

    Reinigung

    Good accessibility for blade changing or cleaning.

    DS Produktführung

    Safe product guidance with easy adjustment.

    Produktführung

    Safe product guidance

    DS
    DS, offen
    DS Verstellung
    DS
    Reinigung
    DS Produktführung
    Produktführung
    ds layout
    Standard specification
    
    Welded machine frame, stainless steel, overall width transport system 840 mm
    Panels, doors and electrical cabinet or switchbox made from stainless steel
    Hasp locking for cover panels
    Protective covers made of polycarbonate above transport line
    Protection hoods made of perforated stainless steel panels or aluminum
    Footrests without dowel holes
    Conveyor system with adjustable speed
    Plastic modular belt with anti-skip rubber surfaces at the bottom side
    Lateral guides above transport conveyor, manually adjustable 6-lanes
    Top belt height, manually adjustable
    Slicer -Upper infeed by belt, two belts per disc slicer, common drive - 5 disc slicers
    Disc slicer unit swiveable, spring-loaded
    Disc slicer unit with additional sensor with mechanical safety locking for openings
    Central drive for disc slicer(s) with frequency-converter adjustable speed
    Driven disc slicer adjustment: position of cut in height
    Disc slicer adjustment by handwheel in crosswise direction, 5 disc slicers
    Positions of disc slicers is crosswise centrically adjustable by handwheel, position of the center disc slicer is fixed - uneven number of disc slicers
    Signal lamp - red / green
    Switch cabinet with hasp locking
    Switch cabinet with fan+filter system - standard-
    Operating elements located in the machine panel or door of the switch box
    Contactor control system with switches
    Frequency converter Hitachi
    Electric execution according to CE-specification
    Operating language and labels in German language
    Operating manual in German language
    Spare parts catalogue in German language
    Options
    
    Extended frame design at the infeed side for transport devices, stainless steel
    Extended frame design at the outfeed side for transport devices, stainless steel
    Protective covers made of stainless steel panels above transport line
    Foot with swivel castors and lock
    Lateral guides, lattice with manually adjustment
    Removable spinners for cluster products before disc slicing
    Manual height adjustment of cutting position and product height
    Switch cabinet with air-conditioning
    Frequency converter SEW
    Frequency converter Allen Bradley
    Voltage modulation, 3-phase
    Electric execution according to UL-specification
    Customer-specific special machine modifications
    Customer-specific operating language and labels
    Customer-specific operation manually
    Remote video URL

    Can the machine be cleaned wet?

    The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

    Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

    Change kits allow cleaning and preparation in addition to the production operation.

    Are brochures in other languages available?

    Further brochures in other languages ​​are available here. The technical state may not be updated!

    How loud is a machine by GHD Hartmann?

    The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

    Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

    The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

    As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

    Which controls can GHD Hartmann Maschinenbau offer?

    In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

    Siemens or Allen Bradley are available as options.

    What compressed air quality is recommended for machine use in the food industry?

    According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

    Sesam Burger geschnitten
    Burger geschnitten

    DS

    Automatic slicing machine for baguettes, hot dog and hamburger buns. The incoming products are transferred to an upper and lower belt and sliced using centrally driven circular knives.

    All guides and the upper belt are adjustable without tools.

    The machine frame and all casings are made of stainless steel – important for long value preservation and good for easy and hygienic cleaning. Various slicing arrangements enable a hinge cut to be made on all tracks simultaneously, or bar cuts to be made simultaneously with a reduced number of tracks.

    Technical specifications
    
    Dimensions: Length: approx. 1500 -1900 mm, Width: customer specific, Working height approx. 1000 mm
    Product dimensions: Diameter / width: min. approx. 50 mm, Height: 20 - 80 mm
    Capacity: approx. 10.000 products/h per lane
    Speed disc slicer adjustable
    Dia. Cutting disc customer specific
    Speed: adjustable
    Controller: Contractor control
    Operating panel: Switches and buttons (line control- touchscreen)
    Control voltage: 24 V, DC
    Frequency controller: Hitachi
    Pneumatic system: Festo
    Power supply: 230/400 Volts / 50 cycles
    Power consuption: approx. 2 kW
    Compressed air: min. 6,0 bar (ISO 8573-1)
    Operating side: left / right
    Protection class: IP 54
    Adjustment: manual